Sovol SV07 Plus 3D Printer with Klipper Firmware, Max Print Speed 500mm/s, 300℃ High Temp, 600W Power Supply 420W Hotbed 5″ Touch Screen Planetary Direct Drive Auto Leveling 11.8×11.8×13.8in

Brand: Sovol

Color: Black

Features:

n
• 【Max Print Speed 500mm/s】Klipper firmware allows SV07 Plus to speed up to 500mm/s at Maximum. SV07 Plus is equipped with 480×800 high resolution 5 inch touch screen which brings you totally different experience from knob screen and normal 4.3inch touch screen in the market. Klipper also offers a range of function options, including the height map and input shaper, while you could DIY based on your specific needs.

n

• 【Max Print Speed 500mm/s】Klipper firmware allows SV07 Plus to speed up to 500mm/s at Maximum. SV07 Plus is equipped with 480×800 high resolution 5 inch touch screen which brings you totally different experience from knob screen and normal 4.3inch touch screen in the market. Klipper also offers a range of function options, including the height map and input shaper, while you could DIY based on your specific needs.

n

• 【Larger Print Volume & Heating Faster】Equipped with 600W Power supply, SV07 Plus brings super excellent and stable heating performance. Upgraded 420W heated bed can be heated to 60℃ in 90 seconds, which is 30 seconds faster at least than most printers in the market ( All sizes ). If you own a SV07 Plus, not only you own a 300x300x350mm larger print volume printer, but also you get super faster heating speed and printing speed.

n

• 【Planetary Dual Gear Direct Drive Extruder】 With Sovol’s self-developed Direct Drive Extruder that comes with planetary dual gear set, SV07 Plus offers a higher drive ratio and lighter motor for precise extrusion. We also have added a large external knob to make feeding easier, so you can focus on your printing project with minimal interruptions.

n

• 【25-point Bed Leveling】SV07 Plus features 25-point auto leveling with an inductive sensor to detect and compensate for unevenness in the heated bed. This precise and smart technology makes it possible to get a fantastic first layer. Note: Set initial layer height to 0.3mm when slicing will help you get optimal results. If you have any adhension issue we recommend you to wipe the PEI surface with alcohol before the next printing.

n

model number: SV07 Plus

Part Number: /

Package Dimensions: 24.9 x 23.5 x 10.5 inches