Tig Cooler, Tig Welder Torch Water Cooling system, 10L Water capacity,7L-12L/min Rated Water Flow with Flow Alarm, WRC-300A 110V

Brand: DIYAREA

Color: Green

Features:

• This powerful cooling 110V water cooler is designed to work with TIG welders and provide maximum cooling capacity

Package Dimensions: 339x547x15930

Details: Applications:nFor use with water-cooled TIG torchesnFor use with water-cooled MIG gunsnnSpecificationsnModel: WRC-300AnProtection Level: IP21nCooling power: 1.5KW(1L/min)nPump power: 260WnRated water flow: 7L-12L/minnWater capacity: 10LnMax pressure/head: 0.4Mpa/60HznRated lift: 32MnOperating temperature: -20℃— 60℃nGross Weight: 16kg (35.3lbs)nPackage Size: 21.3″*16″*13″ (540*410*340mm)nnFeature:nEfficient cooling of water cooled TIG torchnCompact designnLarge fannStainless steel pumpnCopper radiatornAdaptable to other brandsnQuick couplersnRapid, leak resistant connectionsnnPrecautions:n1. Please read the instructions carefully before installation and operationn2. Confirm the input voltage. (See the nameplate on the machine. Incorrect input voltage will damage the machine.)n3. If the cooler has not been put into use for long, please restart the motor and make sure the water is pumped out to prevent damages of water cooling torchn4. Make sure the tank is filled with clean water and all the connectors is fixed firmly. Always keep enough water (over safety line) in the tank, or the pump may be damaged by water shortagen5. If the motor works properly, but water draining is small or even no water, please pump in pressure air from compressor to inlet or outlet for 20 secondsn6. If the motor does not work:A. Input voltage too low, please change electric supply; B. Starting capacitor might be burnt out, please change a new onen7. IMPORTANT–The unit should be kept on at all times during welding to prevent damage to torches and cablesnnPackage Content:n1 X TIG Welder Water Coolern1 X Water Hosen1 X Inlet Connectorn1 X Outlet Connectorn1 X English Manual

UPC: 720355328078